Manual Lithium Ion Battery Assembly Equipment Electric Transistor Spot Welder
Equipment introduction
● Cheebo lithium battery point welding machine adopts independently developed precision welding head, and the pressure is accurately regulated.
● CBLQ-5A battery nickel welding machine does not require welding transformers, with small size, light weight, and beautiful.
● It can be applied to two ways: convex point welding and pointed needle welding.
● The 18650 battery point welding machine has three control methods: constant current, constant voltage, constant current and constant pressure combination methods.
● The built -in pre -inspection function can be used to determine whether the workpiece is powered on before welding.
● The welding current of the lithium battery point welding machine can be quickly switched through the transistor without a transformer.
● Welding power supply is controlled by switching, which can achieve small and efficient welding and high yield.
● Power welding current rises quickly, and high -quality welding will be achieved in a short period of time.
● Lithium -ion battery pack point welding machine increases the connection point function to effectively improve production efficiency.
● Independent development of precision welding heads, accurate pressure adjustment control.
● Micro -computer technology control, dynamic real -time monitoring of welding current, voltage, power, and resistance waveforms.
● 5.7 -inch high -definition LED display, the equipment parameters are adjusted and intuitive, and multiple programs can be stored in advance.
● There are three welding methods: constant voltage, constant current and constant voltage current combination.
Technical specification
| Welding thickness | 0.02-0.5MM | Welding power supply | Transistor |
| Welding mode | Single side double point horizontal welding | Table top and weld head height | 250 (Maximum pitch adjustable) |
| Supply current | 5000A/8000A/10000A | Welding speed | 200P/M |
| Spot welding method | Bump welding/tip welding | Welding pressure | 5KG/F |
| Maximum voltage | 30V(Adjustable by oneself) | Equipment size | 600*900*1300MM |
| Driving mode | Electric | Machine Weight | 60KG |
| Power source specification | Single-phase 220V50/60HZ | Application scenarios | Battery welding |
-
Welding case
Function Introduction
1. Cylinder (Pneumatic)
Pneumatic welding of cylinders. Save manpower. Ensure stable welding pressure output.
2. Thick cable
Thick pure copper cable, low resistance wire, large carrying capacity, thick enough, welding no heat current no loss transmitted to the welding head, to ensure welding current.
3. Adjusting mechanism of welding head
The welding head can be adjusted up and down to increase the distance between the desktop and the welding head. It can weld various types of cells with different heights.
FAQ
Q: How do I install and run the machine?
A: Our technicians had installed the machine before shipment. For the installation of some widgets, we will send out detailed training videos and user manuals randomly. 95% of customers can teach themselves.
Q: How can I do if the machine goes wrong?
A: If you encounter such problems, please contact us as soon as possible. Do not try to repair the machine by yourself or others. We will respond as soon as possible within 24 hours to solve your problem.
Q: I don't know which one is right for me?
A: Please tell us the following information
1) Battery model and type.
2) Welding material and welding thickness
3) Commercial industry: We have a lot of sales experience and can provide you with advice.
Q: What's your minimum order quantity?
A: We don't have a minimum order quantity. Whether it is an order of 1 or 100, we will wholeheartedly support you.
Q: How does your factory do in terms of quality control?
A: Quality comes first. More than 20 tests will be performed on each unit. After all the tests are passed, our QC will test the welding performance.
Service process
After sale:
1. Confirm whether customers need on-site service or video communication guidance for debugging equipment.
2. If there is any problem with the equipment, video communication will be adopted to solve the problem first. Door-to-door service can be provided if there is no solution.
Pre-sale:
1. Customers send inquiries and inquiries
2. Recommend products according to customer needs
3. Video communication to confirm final requirements
4. Both parties shall deliver the confirmation of technical specifications
5. Both parties sign the contract
6. Place orders and arrange production in the workshop
7. Arrange delivery
Looking forward to your consultation, we will provide you with the best quality service throughout the process!!!
Product Tags:
|
|
Manual Lithium Ion Battery Assembly Equipment Electric Transistor Spot Welder Images
|
